Maintenance After Using Diesel Engine Concrete Mixers

2014-07-16 15:07:35

Concrete-Mixer.jpg

1) After each work shift, load some quantity of rubble and sand into the diesel engine concrete mixer mixing drum, perform 5 to 10 minutes of agitation and then discharge them, so as to remove the residual concrete in the drum and avoid deposit of concrete inside.
2) Use the washing water pipe to clean off the ash deposit and adhered concrete on the outside of the concrete mixer machine.
3) Set the loading hopper to the transport position
4) In freezing season, fully drain the water in the water supply system.
5) Oil the lubricating points as necessary. The surfaces of the jockey pulley for the diesel engine concrete mixer mixing drum, and the grand gear ring etc should be smeared with grease frequently.